- How do you select a heat exchanger?
- What are the two types of heat exchangers?
- What is difference between condenser and heat exchanger?
- How do you calculate pressure drop in a heat exchanger?
- What is the most effective heat exchanger?
- How do I know what size heat exchanger I need?
- What are the different types of heat exchangers?
- Why lmtd is used in heat exchanger?
- How do you calculate effective heat exchanger?

## How do you select a heat exchanger?

Main Criteria for Heat Exchanger Sizing and Selection For a gasketed plate heat exchanger, the gaskets must be compatible with the fluids in the unit.

Thermal fluid characteristics and product mix.

If the heating or cooling fluid is susceptible to fouling, a corrosion resistant material may be needed.

Location..

## What are the two types of heat exchangers?

What Are The Different Types Of Heat Exchanger?Finned Tube Heat Exchanger Or Air Cooled Heat Exchanger. Suitable for: air/gas to fluid. … Shell And Tube Heat Exchanger. Suitable for: fluid to fluid / fluid to gas. … Plate Heat Exchanger Or Gasket Plate Heat Exchanger. Suitable for: fluid to fluid / fluid to vapour.

## What is difference between condenser and heat exchanger?

While a heat exchanger can regulate process temperatures independently, a condenser is a component of a chiller system (water-cooled or air-cooled) which functions to remove heat generated by an industrial or commercial process.

## How do you calculate pressure drop in a heat exchanger?

Total volumetric flow = 50000 kg/hr ÷ 988.0 kg/m3 = 50.61 m3/hr Volumetric flow in each 1″ tube = 50.61 ÷ 25 = 2.02 m3/hr Pressure loss per unit length of the tube is then calculated using EnggCyclopedia’s pressure drop calculators for pipes and tubes. This calculator is based on Darcy-Weisbach equation.

## What is the most effective heat exchanger?

Plate exchanger is the most efficient due to turbulent flow on both sides. High heat-transfer coefficient and high turbulence due to even flow distribution are important. However, a plate heat exchanger regenerator is restricted to low viscosities. With high viscosities, a special tubular may be required.

## How do I know what size heat exchanger I need?

4.0 – HEAT EXCHANGERS CALCULATIONS:The main basic Heat Exchanger equation is: Q = U x A x ΔTm =The log mean temperature difference ΔTm is: ΔTm =(T1 – t2) – (T2 – t1) = °F.T1 = Inlet tube side fluid temperature; t2 = Outlet shell side fluid temperature;ln (T1 – t2) (T2 – t1)

## What are the different types of heat exchangers?

Types of Heat ExchangersShell and tube heat exchangers.Double pipe heat exchangers.Plate heat exchangers.Condensers, evaporators, and boilers.

## Why lmtd is used in heat exchanger?

The log mean temperature difference (LMTD) is used to determine the temperature driving force for heat transfer in flow systems, most notably in heat exchangers. … The use of the LMTD arises, straightforwardly, from the analysis of a heat exchanger with constant flow rate and fluid thermal properties.

## How do you calculate effective heat exchanger?

If one of the fluids is undergoing a change of phase throughout the entire heat exchanger and at a constant temperature (i.e. heat capacity is infinite), the thermal efficiency is simply Eff=1-exp(-U.A/Cmin), where Cmin is the heat capacity (m x cp) for the single phase fluid, U-overall heat transfer coeffcient and A …